Rexroth A10FM45 Piston Hydraulic Motor for Sales

• Certification: CE, ISO9001
• Excitation Mode: Excited
• Power Rating: 500W
• Casing Protection: Closed Type
• Number of Poles: 2
• Speed: Low Speed
• Model NO.: A10FM45
• Type: Plunger Type
• Warranty: One Year
• Weight: 50kg
• Transport Package: Wooden Package
• Specification: 38x28x30cm
• Trademark: Rexroth
• Origin: China
• Production Capacity: 60 /Month

Product Description

Rexroth A6VE160 Rexroth A10FM45 Piston Hydraulic Motor For Sales

High pressure piston motor

Product Description: It has a fixed displacement and is used for static pressure transmission in a closed or closed system. When used as a motor, the output number of revolutions is proportional to the flow rate and inversely proportional to the displacement.

Features: The cylinder body and the oil distribution plate adopt spherical surface oil distribution, which can automatically center in rotation, with small circumferential speed and high efficiency; the drive shaft can bear radial load; low noise
A6VE28 A6VE55 A6VE80 A6VE107 A6VE160 A6VE250 Rexroth A6VE Hydraulic Piston Motor.
1. complete unit, ready assembled and tested
2. easy assembly, simply plugs-in to mechanical gearboxes
3. no installation tolerances to consider  
4. For use in mobile applications
5. The output speed is dependent on the flow of the pump and the displacement of the motor
6. Series 6, for open and closed circuits
7. Axial tapered piston, bent axis design. working pressure up to 400 bar Peak pressure up to 450 bar. 
The variable displacement plug-in motor A6VE is equipped with a standard axial tapered piston rotary group of bent axis design.
Hydrostatic plug-in motors are intended primarily for installation in mechanical gearboxes, e.g. track drive gear
boxes.
The design of the motor with the mounting flange in the center of the housing allows it to be almost fully integrated into a mechanical gearbox to give an extremely compact unit.
Details regarding the choice of hydraulic fluid:     
The correct choice of hydraulic fluid requires knowledge of the operating temperature in relation to the ambient temperature: in a closed circuit the circuit temperature. The hydraulic fluid should be chosen so that the operating viscosity in the operating temperature range is within the optimum range - the shaded area of the selection diagram. We recommended that the higher viscosity class be selected in each case. Example: At an ambient temperature of X °C an operating temperature of 60 °C is set. In the optimum operating viscosity range (shaded area) this corresponds to the viscosity classes VG 46 or VG 68; to be selected: VG 68. Please note: The case drain temperature, which is affected by pressure and speed, is always higher than the circuit temperature. At no point in the system may the temperature be higher than 115 °C.

No.	Model
1	A6VE107EZ3/63W-VZB020B1
2	A6VM80DA1/63W-VZB020B
3	A6VM80DA1/63W-VZB020B
4	A6VM28EZ1/63W-VZB020B
5	A6VE160HA1/63W-VZB020A5
6	A6VE200HA1U2/63W-VAB020A
7	A6VM160HA1R2/63W-VZB020A